ERNTEC

10 Way LOD/PDU

The 10-way distribution module is designed for telecommunications DC power distribution of up to 1250 A. A range of circuit breaker ratings are accommodated, and remote indication of circuit breaker trip is provided. 19″ subrack, 4RU Dual / Single Plane …

18 Way LOD/PDU

The 18-way distribution module is designed for telecommunications DC power distribution of up to 1134 A. A range of circuit breaker ratings are accommodated, and remote indication of circuit breaker trip is provided. The unit may be rack or wall …

High Current LOD/PDU

ERNTEC’s High Current Low Ohmic distribution (HCLOD) module is designed to supply DC loads from 16A to 250A operating in Class A/B/C environments. The module accepts bullet style miniature circuit breakers (MCBs) and the total capacity of this LOD module is …

Half Suite LOD Rack

The Half Suite LOD Rack (HSLR) is specifically configured for installation of up to four 4 RU LOD panels. The HSLR consists of a SE frame supplied with: Top Panel with cut outs. Removable rear and side panels 45 RU, …

Half Suite LOD12A Rack

The Half Suite LOD12A Rack is a 300mm deep cabinet with 2 pre-installed 10 or 18 way LOD panels The LOD12A consists of a SE frame supplied with: 2 LOD Distribution Panels (Can select either 10 way or 18 way) Top …

Full Suite Distribution Rack

The full suite distribution rack (FSDR) is designed for LOD power distribution in Telecommunications & 48 V DC applications. This rack is specifically configured for installation of up to four 4 RU LOD panels. The rack is fitted with alarm wiring …

High Current LOD Rack

ERNTEC HCLR-LB/LOD13L rack can be configured for installation of up to 4 x 4RU High Current LOD panels/modules. These racks are deployed where there are requirements for a large number of HCLOD circuits near the platform(s) being powered. Suitable for …

SE Universal Rack

The SE Universal Distribution rack is designed for telecommunications DC power distribution of up to 1200 A. The rack can house a wide range of modules for distributing power from the primary power source to the load.  Up to four modules can be …

Large Capacity Rack

The Large Capacity Rack is designed for telecommunications DC power distribution where consolidation and distribution of DC Power is required remote from the power source. The LCR caters for a capacity of up to 1600A + 1600A (‘A’ busbar + …