0.8 mm genderless

The connector series MicroStac with 0.8 mm pitch and with SMT termination is based on a hermaphroditic design. As result of this the male and the female connector are identical. The same style for male and female connector features the requirement for a economical connector solution in modern applications in electronics.

There are three versions available:

• 6 pin single row version
  
• 12 pin single row version
  
• 50 pin single row version
  
  
  

Shared Literature for 0.8 mm genderless MicroStac Mating Conditions  [PDF - 416 KB ] Stacking Heights for MicroStac  [PDF - 0 B ]

6 Pin Single Row Version

The SMT connector series MicroStac with 0.8 mm pitch and with SMT termination is based on a hermaphroditic design. As result of this the male and the female connector are identical.

The dual-sided PCB application contact principle provides for a tilt-proof and insertion-proof connector position on the PCB.

The gripper surface is integrated within the insulator body. This obviates the need for the standard assembly hood.

Optionally, versions featuring positioning pegs are also available. Using the MicroStac a board-to-board height from 5.0 mm up to 6.5 mm is achieved.

12 Pin Single Row Version

The SMT connector series MicroStac with 0.8 mm pitch and with SMT termination is based on a hermaphroditic design. As result of this the male and the female connector are identical.

The dual-sided PCB application contact principle provides for a tilt-proof and insertion-proof connector position on the PCB.

The gripper surface is integrated within the insulator body. This obviates is the need for the standard assembly hood.

Optionally, versions featuring positioning pegs are also available. Using the MicroStac a board-to-board height from 5.0 mm up to 6.5 mm is achieved.

50 Pin Single Row Version

The SMT connector series MicroStac with 0.8 mm pitch and with SMT termination is based on a hermaphroditic design. As result of this the male and the female connector are identical.

The dual-sided PCB application contact principle provides for a tilt-proof and insertion-proof connector position on the PCB.

The gripper surface is integrated within the insulator body. This obviates the need for the standard assembly hood.

Optionally, versions featuring positioning pegs are also available. Using the MicroStac a board-to-board height from 5.0 mm up to 6.5 mm is achieved.